Victorian Railways Y class

For the later diesel locomotives, see Victorian Railways Y class (diesel).

The Victorian Railways Y class was a class of 0-6-0 steam locomotives.

Victorian Railways Y class
Type and origin
Power type Steam
Builder Phoenix Foundry
Build date 1885
Specifications
Gauge 1,600 mm (5 ft 3 in)
Length 60 ft 5 12 in (18.43 m)
Axle load 14.5 long tons (14.7 t; 16.2 short tons)
Adhesive weight 57.35 long tons (58.27 t; 64.23 short tons)
Loco weight 66.95 long tons (68.02 t; 74.98 short tons)
Tender weight 45.8 long tons (46.5 t; 51.3 short tons)
Total weight 112.75 long tons (114.56 t; 126.28 short tons)
Fuel type Coal (30)
Oil (30)
Cylinders 2
Cylinder size 20 in × 26 in (508 mm × 660 mm)
Career
Operators Victorian Railways
Numbers Y108-Y419
Disposition 11 preserved, 49 scrapped


The Y class was an example of the new policy of standard design principles being adopted by the railways of the time. The original pattern locomotive (an 0-6-0 tender engine) was built by Kitson & Co. at Leeds in England in 1885, and was exhibited, along with E426, in 1888 at the Melbourne Centennial Exhibition, held in the Melbourne Exhibition Building. The other 30 locomotives of this type were built by the Phoenix Foundry at Ballarat in 1888-1889. They were given road numbers 383 to 441 (odd numbers only), and the pattern engine 445, 443 having been allotted to an 'Old' R class. They were big locomotives for their time - in fact the largest and most powerful 0-6-0s to run in Australia. The class excelled in their performance and acceptance by crews. They were often seen on suburban passenger trains prior to electrification, finishing their lives as yard shunters. Withdrawal of the Y class began in 1926, and only Nos 108 (originally 412) and 112 (originally 419) survive, the latter of which has been restored to working order. The last in regular service was No. 108 which was withdrawn in 1963 after being a pilot engine at North Melbourne for many years.

Y109 was taken off the register 23 December 1954 and frame and wheels sold to the Brunswick Plaster Mills Pty. Ltd, which rebuilt it into a diesel-mechanical locomotive, for service on a siding which provided access to a gypsum deposit near Nowingi in north-western Victoria.

Preservation

Y112 was withdrawn from service in 1961 and was preserved on a plinth outside the Ballarat railway station. It was purchased by the Ballarat Historical Society and is now owned by Ballarat's Sovereign Hill Museum. The locomotive was leased to Steamrail Victoria and restored to operational condition with the help of West Coast Railway. It was returned to service in 1996 and operates occasional rail tours.[1]

The remains of Y109 are stored in the grounds of the Ballarat East Locomotive Depot.[2]

Y108 is on static display at the Australian Railway Historical Society Museum, North Williamstown.

References

  1. "Y112". Australian Steam - Preserved Steam Locomotives Down Under. Retrieved 2016-08-24.
  2. "Y109". Australian Steam - Preserved Steam Locomotives Down Under. Retrieved 2016-08-24.

External links

This article is issued from Wikipedia - version of the 11/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.