South African Class 14A 4-8-2

South African Class 14A & 14R 4-8-2

Class 14R no. 1905 at Klerksdorp, 17 April 1978
Type and origin
♠ Class 14A as built with a Belpaire firebox
Class 14R rebuilt with a Watson Standard boiler
Steel firebox - Copper firebox
Power type Steam
Designer South African Railways
(D.A. Hendrie)
Builder North British Locomotive Company
Serial number 20568-20587, 20822-20842
Model Class 14A
Build date 1914
Total produced 41
Specifications
Configuration 4-8-2 (Mountain)
Driver 2nd coupled axle
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Leading dia. 28 12 in (724 mm)
Coupled dia. 48 in (1,219 mm)
Trailing dia. 33 in (838 mm)
Tender wheels 34 in (864 mm)
Wheelbase 56 ft 11 34 in (17,367 mm)
  Engine 30 ft 7 in (9,322 mm)
  Leading 6 ft 2 in (1,880 mm)
  Coupled 12 ft 9 in (3,886 mm)
  Tender 16 ft 9 in (5,105 mm)
  Tender bogie 4 ft 7 in (1,397 mm)
Length 65 ft 4 58 in (19,929 mm)
Height ♠ 12 ft 10 in (3,912 mm)
12 ft 11 34 in (3,956 mm)
Axle load ♠ 15 LT (15,240 kg)
15 LT 16 cwt (16,050 kg)
  Leading ♠ 14 LT 6 cwt (14,530 kg)
15 LT 12 cwt (15,850 kg)
  1st coupled ♠ 14 LT 19 cwt (15,190 kg)
14 LT 14 cwt (14,940 kg)
  2nd coupled ♠ 15 LT (15,240 kg)
15 LT 16 cwt (16,050 kg)
  3rd coupled ♠ 14 LT 19 cwt (15,190 kg)
15 LT 2 cwt (15,340 kg)
  4th coupled ♠ 14 LT 19 cwt (15,190 kg)
14 LT 18 cwt (15,140 kg)
  Trailing ♠ 11 LT 7 cwt (11,530 kg)
10 LT 19 cwt (11,130 kg)
  Tender bogie Bogie 1: 27 LT 10 cwt (27,940 kg)
Bogie 2: 23 LT 11 cwt (23,930 kg)
  Tender axle 13 LT 15 cwt (13,970 kg)
Adhesive weight ♠ 59 LT 17 cwt (60,810 kg)
60 LT 10 cwt (61,470 kg)
Loco weight ♠ 85 LT 10 cwt (86,870 kg)
87 LT 6 cwt (88,700 kg)
Tender weight 51 LT 1 cwt (51,870 kg)
Total weight ♠ 136 LT 11 cwt (138,700 kg)
138 LT 7 cwt (140,600 kg)
Tender type MP1 (2-axle bogies)
MP, MP1, MR, MS, MT, MT1, MT2, MX, MY, MY1 permitted
Fuel type Coal
Fuel capacity 10 LT (10.2 t)
Water cap 4,250 imp gal (19,300 l)
Generator Pyle National turbo
Firebox type ♠ Belpaire - Round-top
  Firegrate area 37 sq ft (3.4 m2)
Boiler:
  Model Watson Standard no. 2
  Pitch ♠ 7 ft 7 in (2,311 mm)
8 ft 12 in (2,451 mm)
  Diameter ♠ 5 ft 1 58 in (1,565 mm)
5 ft 7 12 in (1,714 mm)
  Tube plates ♠ 19 ft (5,791 mm)
19 ft 4 in (5,893 mm)
19 ft 3 58 in (5,883 mm)
  Small tubes119: 2 14 in (57 mm)
87: 2 12 in (64 mm)
  Large tubes21: 5 12 in (140 mm)
30: 5 12 in (140 mm)
Boiler pressure ♠ 180 psi (1,241 kPa)
190 psi (1,310 kPa)
Safety valveRamsbottom - Pop
Heating surface ♠ 2,059 sq ft (191.3 m2)
2,075 sq ft (192.8 m2)
  Tubes ♠ 1,909 sq ft (177.4 m2)
1,933 sq ft (179.6 m2)
  Firebox ♠ 150 sq ft (14 m2)
142 sq ft (13.2 m2)
Superheater:
  Heating area ♠ 483 sq ft (44.9 m2)
492 sq ft (45.7 m2)
Cylinders Two
Cylinder size 21 in (533 mm) bore
26 in (660 mm) stroke
Valve gear Walschaerts
Valve type Piston
Couplers Bell link-and-pin
AAR knuckle (1950s)
Performance figures
Tractive effort ♠ 32,250 lbf (143.5 kN) @ 75%
37,360 lbf (166.2 kN) @ 75%
Career
Operators South African Railways
Class Class 14A & 14R
Number in class 41
Numbers 1576-1595, 1901-1921
Delivered 1914-1915
First run 1914
The leading coupled axle had flangeless wheels

The South African Railways Class 14A 4-8-2 of 1914 was a steam locomotive.

In 1914 and 1915, the South African Railways placed 41 Class 14A steam locomotives with a 4-8-2 Mountain type wheel arrangement in service. It was a lighter version of the Class 14, which had entered service a year earlier.[1][2]

Manufacturer

Following the success of the Class 14, D.A. Hendrie, Chief Mechanical Engineer (CME) of the South African Railways (SAR), used its design as basis for the lighter Class 14A locomotive for use on coastal lines, particularly the Cape Eastern line from East London, where the physical conditions were approximately similar to those of the lower sections of the Natal mainline, but the permanent way was not as heavy. This second version of the Class 14 was ordered from the North British Locomotive Company in 1913 and was built in two batches. Twenty were delivered in 1914, numbered in the range from 1576 to 1595, and another 21 in 1914 and 1915, numbered in the range from 1901 to 1921.[1][3][4]

Characteristics

D.A. Hendrie

Like the Class 14, the Class 14A had piston valves, Walschaerts valve gear, a Belpaire firebox and was superheated, but it had nearly 6 inches (152 millimetres) less boiler diameter than the Class 14, to reduce the axle loading from 16 long tons 3 hundredweight (16,410 kilograms) to 15 long tons (15,240 kilograms). To compensate for the smaller boilers, they were equipped with smaller cylinders with a bore of 21 inches (533 millimetres) instead of 22 inches (560 mm).[1][2][3][5]

The locomotives were erected at the East London workshops. Apart from their boilers and cylinders, the frame and other important components were standard with those of the Class 14, such as the driving wheels, bogie, Pyle National turbo-generators and headlamps, Hasler speed indicator, sight feed lubricators, Hendrie's steam reversing gear, steam operation for rocking the firegrate, Gresham and Craven injectors, steam brakes and combination vacuum ejectors. It was also delivered with Type MP1 tenders, which had a coal capacity of 10 long tons (10.2 tonnes) and a water capacity of 4,250 imperial gallons (19,300 litres). One noticeable visible difference from the Class 14 was the absence of the two large sandboxes on each running board.[1][6][7]

Watson Standard boilers

During the 1930s, many serving locomotives were reboilered with a standard boiler type, designed by then CME A.G. Watson as part of his standardisation policy. Such Watson Standard reboilered locomotives were reclassified by adding an "R" suffix to their classification.[2][6][7]

From the mid-1930s, all the Class 14A locomotives except no. 1915, were eventually reboilered with Watson Standard no. 2 boilers. In the process they were also equipped with Watson cabs, with their distinctive slanted fronts, compared to the conventional vertical fronts of their original cabs. In spite of still being nearly 3 long tons (3.0 tonnes) lighter after reboilering, they were reclassified to Class 14R along with reboilered Class 14 locomotives, instead of to Class 14AR. Even so, they could still be identified as ex Class 14A locomotives by the absence of the big sandboxes on their running boards.[1][2][6][7]

Their original Belpaire boilers were fitted with Ramsbottom safety valves, while the Watson Standard boiler was fitted with Pop safety valves. An obvious difference between an original and a Watson Standard reboilered locomotive is usually a rectangular regulator cover, just to the rear of the chimney on the reboilered locomotive. In the case of reboilered Class 14A locomotives, two even more obvious differences are the Watson cab and the absence of the Belpaire firebox hump between the cab and boiler on the reboilered locomotives.[6][7]

Service

South African Railways

As intended, the Class 14A was placed in service on the East London mainline. Although they were good engines, they were not very successful there and were soon relocated to be shared between the Cape Western system, for use between Cape Town and Beaufort West, and the Eastern Transvaal system, for use on the line to Delagoa Bay out of Pretoria, particularly between Waterval Boven and Komatipoort. The Cape Western's engines later joined the rest of the Class in the Eastern Transvaal. They proved themselves as free steaming locomotives, low on maintenance costs and trouble-free, and therefore popular with crews and fitters alike.[1][2][3]

Industrial

Six were eventually sold into industrial service.

Illustration

The main picture shows second order Class 14R no. 1905 at Klerksdorp, Transvaal, on 17 April 1978. The first of the following pictures illustrate the locomotive, as built, while the rest show reboilered Class 14R (ex Class 14A) locomotives in service.

References

  1. 1 2 3 4 5 6 Espitalier, T.J.; Day, W.A.J. (1945). The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways (Continued). South African Railways and Harbours Magazine, July 1945. pp. 514-515.
  2. 1 2 3 4 5 Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 10–11, 57–58. ISBN 0869772112.
  3. 1 2 3 Holland, D.F. (1972). Steam Locomotives of the South African Railways, Volume 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. p. 24. ISBN 978-0-7153-5427-8.
  4. North British Locomotive Company works list, compiled by Austrian locomotive historian Bernhard Schmeiser
  5. 1 2 Durrant, A E (1989). Twilight of South African Steam (1st ed.). Newton Abbott, London: David & Charles. pp. 63–64. ISBN 0715386387.
  6. 1 2 3 4 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 43.
  7. 1 2 3 4 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 41, 43.
Wikimedia Commons has media related to South African Class 14A (4-8-2).
This article is issued from Wikipedia - version of the 4/25/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.